Hi Everyone,
Today I faced an issue of my Ruizu X02 Mp3 player malfunctioning due to a virus. It had Hungarian words in the welcome screen and it froze on that screen. So I decided to flash the player using the official firmware.
I searched in the internet and was able to find the http://www.ruizutek.com/manuals-firmware.html
site which contained the Ruizu X02 firmware.
Then I searched a software to flash the mp3 player from my windows 10 system. It took a while because some of the software were outdated and couldn't run on windows 10 as well as some of the software link locations returned 404.
Finally I found this http://www.sweetpeatoyco.com site to download a software called Audio Product Tool 1.03_01.
Then I followed this http://www.agptek.com/forum/viewtopic.php?f=103&p=68#p68 forum to install the firmware on X02. As I have learned this agptek site is the counter part of ruizu company in Europe. Ruizu is sold mainly in China.
That blog was written nicely and I was able to troubleshoot and install the firmware in X02 successfully.
First when I connected the player to usb slot using a usb cable software didn't detect my player. So I was so frustrated and almost gave up until I saw the 4th step.
It says,
Note:
If your player failed to be recognized or updated, please connect it to your computer the way below:
① For those player designed with soft power button:
Long press the power button to turn off the player
Plug the bigger end of the USB cable into the computer interface first
Then hold down the power button and plug the other end of the USB cable into the player at the same time.
I did exactly the same and tadaahh it detected my player.
It took around 10 mins to install so be patient until it shows successful installation.
